Full text available in english in Adobe Acrobat format:https://www.forestry.actapol.net/issue2/volume/10_2_2006.pdf
Issue 5 (2) 2006 pp. 95-103
Henryk Różański, Mieczysław Kujawski, Krzysztof Jabłoński
MECHANICS OF THE MILLING OF LOGGING RESIDUES WITH A MERI CRUSHER MJS-2.5 DT MACHINE
Abstract The object of the analysis was a Meri Crusher MJS-2.5 DT crushing machine powered by a Valtra T-190 tractor. The crusher was 2500 mm wide and the power of the tractor was 190 HP. During the analysis the quantity of the biomass to be milled and the productivity of the milling operation itself were determined. Based on given technical parameters of the crusher (the rpm of the PTO, number of cutters, diameter of the drum and the driving speed of the tractor), the rpm of working drum, the linear velocity of the cutters, the power and torque of the working drum and the milling productivity were determined. Based on the analysis of working movements of the machine, the forces which occur on the cutters were calculated. It was found that the average force on one cutter was 190 N.
Keywords: logging residues, crusher, labour consumption
Full text available in english in Adobe Acrobat format:https://www.forestry.actapol.net/issue2/volume/10_2_2006.pdf
For citation:
| MLA | Różański, Henryk, et al. "MECHANICS OF THE MILLING OF LOGGING RESIDUES WITH A MERI CRUSHER MJS-2.5 DT MACHINE." Acta Sci.Pol. Silv. 5.2 (2006): . |
| APA | Różański H., Kujawski M., Jabłoński K. (2006). MECHANICS OF THE MILLING OF LOGGING RESIDUES WITH A MERI CRUSHER MJS-2.5 DT MACHINE. Acta Sci.Pol. Silv. 5 (2), |
| ISO 690 | RóżAńSKI, Henryk, KUJAWSKI, Mieczysław, JABłOńSKI, Krzysztof. MECHANICS OF THE MILLING OF LOGGING RESIDUES WITH A MERI CRUSHER MJS-2.5 DT MACHINE. Acta Sci.Pol. Silv., 2006, 5.2: . |
Streszczenie w języku polskim:
https://www.forestry.actapol.net/tom5/zeszyt2/streszczenie-10.html
https://www.forestry.actapol.net/tom5/zeszyt2/streszczenie-10.html